error(s) in ... Unkown error type: [8192] The each() function is deprecated. This message will be suppressed on further calls
Inter Sail Supply - Full Batten MAINSAIL und MIZZEN - MEASUREMENT SHEET
Full Batten MAINSAIL und MIZZEN MEASUREMENT SHEET ORDER
 
Yellow Boxes
Information SHOULD be given
 
 
Blue Boxes
Information optional
 
before you start filling out the form, we recommend to read the information on the page « How to measure»
Fig. 1

Rig dimensions

Main: m m
Mizzen: m m
Backstay adjustableMast
Max. Curvature cm Position Half Height P?
Mast rake: measured at deck height - see Fig 1 C  cm
Notes:

Dimension of Main and Mizzen

(P Luff measured from top of boom to top of head ⇑ Fig 1 and ⇓ Fig 4)
(E Foot measured from back of mast to centre bolt ⇑ Fig 1 and ⇓ Fig 5)
Main:Luff mFoot mCloth Weight grArea 
Mizzen:Luff mFoot mCloth Weight grArea 
Distance from back of mast to backstay
(measured at height of horizontal boom) see ⇑ Fig 1
 m
Distance from back of mast to backstay
(measured at height of sail top/head) see ⇑ Fig 1
 m
Sailcloth:Standard is Dacron
Cut:Standard is Crosscut
Notes:

Reefing hook:
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 8
Back of Mast
Top of Boom
Luff measured from
top of boom to top of head
Foot measured from back of mast to centre bolt
Outhaul Car
 Back of mast to centre bolt mm
Top of boom to centre bolt mm
Top of boom to sail insertion mm
End of boom to centre bolt cm
Top of boom to centre bolt of oulhaur car mm
Width of outhaul pulley / shackle mm
Width of tack eye mm
Back of mast to reefing hook mm
Top of boom to reefing hook mm

Offshore: we deliver the sail with tack / clew rings see sail specification
Optional: tack / clew with pressed eyes 
Sail Number:No.Flo Stripe:Colour
 
Luff:battenslide car system 
Fig. 3
boltrope
 If yes, give details on next page see ⇓ Fig 10.
For other luff systems see - ⇒ Fig. 3
Luffattached to mast with in Fig. 3
 mm mm mm mm
Slide model No.:Length mm
Footattached to boom with Free-flying foot: 
 or like Fig. 3
 mm mm mm mm
Slide model No.:Length mm
Mast(make) 
Boom angle standard 88°or ° 
or straightline dist. from head (mast) to clew (boom) m 

Remarks:

If you have reefing hooks on your gooseneck
fitting as shown in Fig. 4 and 7 we fit standard reefing
rings on the sail - see ⇒ Fig. 13
 
If you have no reefing hooks on your gooseneck fitting
we can fit a pressed eye with webbing band and two
st. st. rings - see ⇒ Fig 14
Fig. 13
Fig. 14
Type A
Type B
Fig. 15
Type C
Type of fitting:(no extra charge)
We can design standard reefing positions, or you can specify by giving us the following information - see ⇑ Fig. 1
No. of reefsSide for reefing ring (only Type A)1st2nd3rd
Horizontal priority (when reefing points on boom are fixed):
(Back of mast to centre reefing eye leech ⇑ Fig. 1 )
 m m m
Vertical priority (when reefing points on boom are variable):
(specify height of centre reefing eye luff above boom ⇑ Fig. 1 )
 m m m
Notes:

Battens:

Remarks: Please note that when a mainsail has full length battens (or is semi full batten) there is usually a larger roach (leech curvature) and the leech should have backstay clearance (to avoid chafing when tacking). Check your existing sail or in the sailplan to see that this clearance space is available. If you are unsure, please contact us for more information or send us your sailplan.

Remarks: We deliver full batten (or semi full batten) mainsails excluding battens and cars.
We can advise you about where you can order battens and cars if necessary.

Alternatively, if you already have a full batten mainsail and you wish to re-use the existing fittings and battens, then we would require the following information:

• number and type of full length battens
• length of each batten
• number and types of batten cars and intermediates, and headboard car type
• number and type of leech fittings for battens

Fill in these relevant details in the following list.


Full Batten Mainsail - extra measurements

Length of each batten (from top to bottom) Round or Flat
Only complete this section (1 - 6) if you wish to re-use your existing battens.
1 cm mm mm
Fig. 9
2 cm mm mm
3 cm mm mm
4 cm mm mm
5 cm mm mm
6 cm mm mm
 
 
Batten slidecar systemMake:
Model No.
 
 
 
Fig. 10
If you have no Leech Box, a leach batten flap (above) will be supplied
Fig. 12
(Fig 9) Height / Diametre of Batten mm
(Fig 9) Width of Batten mm
 
(Fig 10) LuffBox Length  mm
Box Height mm
(Fig. 10) Back of mast to luff mm
(Fig. 10) Centre axle slide to luff mm
(Fig. 10) Back of mast to centre hole of headboard mm
 
 
(Fig. 11) Available width for webbing mm
Fig. 11
S(Fig. 11) Available width for fitting mm

 
M(Fig 12) Leech Box
Length mm 
Height mm 

 

ORDER

Date 
Boat name
Boat Type and Make
Length mWeight kg
Owner
TelFax
e_mail 
Address for Order
Confirmation and
Invoice
Delivery of sail as Yacht in Transit
Address for sail delivery
Date for sail delivery 
Notes

When you have sent us your measuring information formular, we will send you a confirmation.

In the case of an order, we will check the data supplied and will send a proforma invoice with our bank details.

Should you have any questions, please do not hesitate to contact us.
We are happy to assist you.


tresor.png